Secondary Logo

Share this article on:

Revisional Asian Blepharoplasty: Beveled Approach and Resetting of Eyelid Lamellas

Chen, William P. D., MD

Plastic and Reconstructive Surgery – Global Open: August 2018 - Volume 6 - Issue 8 - p e1785
doi: 10.1097/GOX.0000000000001785
Video
United States

From the Department of Ophthalmology, UCLA School of Medicine, Harbor-UCLA Medical Center, Torrance, Calif.

Published online 7 August 2018.

Received for publication January 15, 2018; accepted March 26, 2018.

Disclosure: The author has no financial interest to declare in relation to the content of this article. The Article Processing Charge was paid for by the authors.

William P. D. Chen, MD, 18 Endeavor, Suite 305, Irvine, CA 92618, E-mail: wpdchen@ucla.edu

This is an open-access article distributed under the terms of the Creative Commons Attribution-Non Commercial-No Derivatives License 4.0 (CCBY-NC-ND), where it is permissible to download and share the work provided it is properly cited. The work cannot be changed in any way or used commercially without permission from the journal.

Back to Top | Article Outline

INDICATIONS

Following double eyelid surgery, Asian patients may present with postsurgical complications of high-anchored upper lid crease, excess amount of skin removal and fat reduction. Associated findings include poor crease indentation, static crease, asymmetry, hollow sulcus, lagophthalmos, and acquired ptosis.

Back to Top | Article Outline

APPROACH

Beveled approach and Resetting of Eyelid Lamellas in Revisional Asian Blepharoplasty.1–3 This video shows the author's beveled approach, allowing the surgeon to REACH high toward residual preaponeurotic space, REPOSIT residual fat, REMOVE scarred elements of skin and mid-lamellar tissues, RESET the anterior and posterior lamella, resulting in RECRUITMENT of skin, and partial RESTORATION of the {Preseptal/Pretarsal} ratio.

Back to Top | Article Outline

Preoperative Discussion and Preparation

Often, the goal is to set the high crease lower, with skin shortage being a major obstacle. Photo documentation of the crease height. (Preseptal/pretarsal) ratio is often abnormally reduced with higher crease height for the pretarsal zone. (Pretarsal zone is apparent crease height measured from central eyelid margin to lid crease; preseptal zone is measured vertically from lid crease to lower border of eyebrow.)

Oral diazepam and analgesic are given an hour before, with IV sedation as an option. Topical anesthetic eyedrop (proparacaine) is instilled, and 1 mL or less of 2% xylocaine (with 1:100,000 dilution of epinephrine) is injected. Corneal protector is applied.

Back to Top | Article Outline

STEPS: VIDEO

  1. Marking—The desired crease is marked, typically inferior to the scar and becomes the lower incision line.1 , 2 The upper incision line may be marked to include the previous scar if there is sufficient skin remaining, and it will not result in a compromised lid closure. When there is insufficient skin for this scar excision, a more conservative goal will need to be adopted. The separation between the upper and lower incision may be less than 1 mm of scarred skin to preserve skin.
  2. Skin incision is made first along the lower line, followed by the upper line.
  3. Westcott scissors is used to lyse adhesion along the upper incision line in a steep, superiorly beveled approach (REACH). It traverses through skin-orbicularis adhesion.
  4. Small scissoring motion traverses the next layer of adhesion between the orbicularis and underlying septal remnants. This second layer of dissection may be less angled as one search for the collapsed preaponeurotic space from prior fat removal.
  5. Orbital septal remnant is opened transversely across the upper lid. Preaponeurotic fat is freed and REPOSITED.4
  6. Thin strip of scarred skin-orbicularis along the superior tarsal border may be REMOVED using scissors or bovie.
  7. Release the drapes to allow the forehead and preseptal layers to RESET against a dynamic posterior lamella of levator, Mueller’s muscle, and tarsus.
  8. 6-0 Silk is used to pass through the lower skin edge, picking up some aponeurotic fibers just above the superior tarsal border, and then to the upper skin edge, tying them as 6 or 7 interrupted sutures. 7-0 Suture is applied skin-to-skin in between those single sutures. They are removed after 1 week.

In a series of 48 eyes over a 4-year period, the average lowering of crease height is 2.75 mm.1

Back to Top | Article Outline

PEARLS

  1. The beveled approach allows access to the compromised preaponeurotic space and removal of the scarred mid-lamellar tissues.
  2. Recruitment of skin from above the crease helps with crease construction and Restoration of (preseptal/pretarsal) ratio with reduction of abnormal crease height.
Video

Video

Back to Top | Article Outline

REFERENCES

1. Chen WPD. Beveled approach for revisional surgery in Asian blepharoplasty. Plast Reconstr Surg. 2007;120:545–552; discussion 553–5.
2. Chen WPD. Asian Blepharoplasty and the Eyelid Crease. 2016.3rd ed. Edinburgh, London: Elsevier Sciences; (textbook, with video resources).
3. Chen WP. Concept of triangular, trapezoidal, and rectangular debulking of eyelid tissues: application in Asian blepharoplasty. Plast Reconstr Surg. 1996;97:212–218.
4. Chen WP. The concept of a glide zone as it relates to upper lid crease, lid fold, and application in upper blepharoplasty. Plast Reconstr Surg. 2007;119:379–386.
Copyright © 2018 The Authors. Published by Wolters Kluwer Health, Inc. on behalf of the American Society of Plastic Surgeons. All rights reserved.