The Bodyweight Squat: A Movement Screen for the Squat Pattern : Strength & Conditioning Journal

Journal Logo


The Bodyweight Squat: A Movement Screen for the Squat Pattern

Kritz, Matthew MSc, CSCS1; Cronin, John PhD2; Hume, Patria PhD1

Author Information
Strength and Conditioning Journal 31(1):p 76-85, February 2009. | DOI: 10.1519/SSC.0b013e318195eb2f
  • Free




The bilateral squat (squat) is one of the most prevalent exercises used in strength training worldwide. The popularity of the squat is certainly a reflection of its practicality. Humans throughout time have used variations of the squat pattern to accomplish various tasks associated with activities of daily living (1,9). A significant amount of research has been dedicated to establish the resisted squat as an effective exercise for enhancing strength and power performances (1,8,14,15,18,19,21), which makes it one of the most widely used exercises for increasing physical strength and power (1). However, given the prevalence of the squat pattern in activities of daily living and strength training programming, what is not as well researched is the use of fundamental movements, such as the squat, to screen an athlete's movement competency.

Movement competency can be described as an individual's ability to perform a movement pattern in an optimal manner. Optimal movement may be described as movement that occurs without pain or discomfort and involves proper joint alignment, muscle coordination, and posture (10). Suboptimal or faulty movement resulting in a faulty movement pattern has been described as a disruption in the normal balance of how muscles support and move joints (26,36). The disruption to the muscle may be the result of a muscle that is too strong or too weak that does not fire or turn on at the right time or lacks the appropriate range of motion to accommodate efficient movement. When disruption of the balance of muscle is present, joint function will suffer and performance may be sacrificed. If the faulty pattern is associated with pain, the motor pattern may change to compensate for any experienced discomfort or pain. A change in a pattern of movement, if performed regularly, will become part of the brain's program associated with that movement (26,36). Motor programs are simply ways that the brain stores information about movement (10). Therefore, if the change in the movement pattern persists, outlasting the painful episode, movement quality and athletic performance may be sacrificed in the long term (4,12,26,36).

It has been proposed that the ability to perform a bodyweight squat at or below 90° of knee flexion with proper symmetry and coordination is a good indicator of overall movement quality (12). Conversely, the inability to perform a bodyweight squat at or below 90° of knee flexion with symmetry and control may imply generalized stiffness throughout the body, or restricted joint mobility and/or stability (12). The strength and conditioning professional may be qualified to screen fundamental movement competency with a basic understanding of how the foot, ankle, knee, hip, and shoulder joints and the lumbar and thoracic spine function to provide efficient movement. The squat is a fundamental movement pattern that requires mobility at the ankle, hip, and thoracic spine and stability at the foot, knee, and lumbar spine.

This review outlines current evidence from the research literature supporting proper bilateral squat technique. Biomechanical rationale is provided to substantiate what qualifies as a proper squat pattern. It is the aim of the authors to confirm the presented criterion of the squat pattern and to support the bodyweight bilateral squat as an effective screening tool to measure an athlete's movement competency related to the squat pattern.


A bilateral bodyweight squat (squat) can be described as flexing at the hip and knee joints and descending until the top part of the thigh at the hip joint is lower than the knee joint, then ascending by extending the knee and hip joints to return to the start position (27). Each of the major joints of the lower body (i.e., foot, ankle, knee, and hip) and the lumbar and thoracic spine of the upper body require degrees of stability and mobility to ensure a competent squat pattern occurs (36). When screening the squat, it is worthwhile to be familiar with each joints primary anatomical function and their contribution to movement efficiency. In addition, it is equally important for the strength and conditioning professional to appreciate the change to force production and efficiency of movement when a break down in stability and mobility appear. The variables that may affect an athlete's ability to perform a deep bodyweight squat with symmetry, coordination and balance have been identified as anthropometrics, handedness, previous injury, lack of coordination, range of motion and balance (1,3,12,17,19,20,23,36,37). Table 1 details what the literature considers to be the proper position of each major segment and joint during the upward and downward phase of a bilateral squat. Figure 1 depicts what is considered by the literature to be good squatting form. The sections below explain the kinematic and kinetic qualities of the major joints in the lower body and the trunk region of the upper body. Table 2 provides criteria and optimal viewing position for qualitatively screening a squat.

Table 1:
Kinematic considerations of the bilateral bodyweight squat
Table 2:
Criteria and optimal viewing position for identifying faulty movement patterns related to a bilateral squat pattern
Figure 1:
A graphic depiction of the criteria detailed in Table 1: (a) Baechle (4): (b) Bloomfield (5); (c) Kinakin (18); and (d) summary.


The ankle joint complex consists of 3 joints, namely the ankle joint, subtalar joint, and the midtarsal joint (26,39). The motions that take place at the ankle joint complex are dorsiflexion, plantarflexion, inversion, eversion, and axial rotation (39). Given the ankles range of motion capability in all 3 planes of motion and because none of the aforementioned motions take place exclusively at one joint, the ankle has been deemed a mobility joint (39).

There are many factors, such as injury, that may influence an athlete's ability to perform a deep, balanced, and coordinated squat. During the performance of a squat, ankle mobility is critical to ensure a balanced and controlled motion (10). The ability of the athlete to maintain a flat and stable foot position during a deep squat provides the base for good ankle dorsiflexion (4,12). Ankle dorsiflexion is obviously greater when the knee is flexed because of the influence of the 2-joint muscle, the gastrocnemius, which crosses both the ankle and knee joints (4). A benchmark ankle range of motion for a squat was not found, but during the stance phase in gait ankle range of motion was reported to be 25° of motion 15° coming from plantar flexion and 10° from dorsiflexion (19,39). Stiffness in the ankle joint resulting in poor dorsiflexion range of motion may cause the foot and/or knee joints to compensate (4,12,36). The compensation may have negative implications to the stability required at the foot and knee for efficient mobility at the ankle to occur (36).

Dionisio et al. (14) have reported that when an athlete performs a deep squat, the center of pressure in the foot moves toward the heel during the ascent. Implications to squat technique and force production may be adverse if the heels of the squatter are allowed to rise off the ground. Allowing the heels to rise off the ground during a squat has been observed to create compensatory torques about the ankles, knees, hips, and lumbar spine (14,19,29). The compensatory torque has been reported to increase the torque experienced by the hip, knee, and ankle during a competent squat (4,16,18,19,28,36). With the heels raised off the ground during the ascent, the center of pressure is restricted, which may affect the athlete's ability to perform a balanced, controlled squat. Kovacs et al. (30) reported mean force to be 2.1 and 1.5 times greater (p < 0.05) during ankle flexion and extension, respectively, when performing a squat with the heels raised in contrast to the heels being firmly planted on the ground (30). The increased torque alone may not be cause for concern; however the increased torque coupled with faulty alignment of the lower body during a squat jump or squat jump landing, may contribute to unnecessary wear on the joints and degradation in performance. Therefore, the strength and conditioning professional should screen for ankle mobility when the feet of the athlete are stable and planted firmly on the ground.


The knee joint is the largest joint in the body and is a modified hinge joint made up of the tibiofemoral and patellofemoral joints, which enable flexion in a posterior direction and extension in the anterior direction (4,26). The knee has been described as a stability joint, given its ligament and tendon structure and the fact that it operates as a hinge with limited movement capability in the mediolateral or anteroposterior direction (12,17,18,26,36). Given the knees' predilection for stability, the knees should maintain a position where they are aligned with the hips and feet when performing the squat (5,6,28).

Other authors have performed extensive research into the effects of various joint alignments on knee joint kinetics (1,13,14,16-19,21,24,29,34,37,38,41). When an athlete performs a squat and does not maintain knee alignment with the hips and feet, the ligaments and tendons that stabilize the knee are made vulnerable. The compressive (push together) and shear (resistance to sliding) forces act on the malaligned ligaments and tendons, weakening them over time (17-19,21,37). It has been well documented that excessive shear forces can damage the cruciate ligaments and that too much compressive forces can injure the menisci and articular cartilage (17). During a bodyweight squat, authors have reported patellofemoral compressive forces to be 3.75-4.6 times bodyweight and shear forces ranged from 1.5 to 3.5 times bodyweight (13,16-18,24,38,41).

There are many reasons why the knees may not maintain alignment with the hips and feet during a squat. A frequently reported explanation for the knees failing to maintain alignment has been faulty structure and function of the joints and musculature directly above and below the knee (12,26,36). The biarticular muscles, the hamstrings and rectus femoris, which attach to the hip and knee joints, as well as the gastrocnemius, which attaches to the knee and ankle joints, create a disadvantage in the knee if they are underdeveloped, lack appropriate flexibility, or activate in the wrong sequence (4).

Two of the most commonly reported patterns of movement that may contribute to knee dysfunction and pain are medial or lateral motion of the knees when observing the squat from the front (Figure 2a and 2b) and excessive anterior motion (Figure 3) when observing the squat from the side (4,18,21,26,28,36). Excessive mediolateral movement of the knees or valgus and varus frontal plane movement (Figure 2a and 2b) has been in part attributed to poor pelvic stability and improper function of the rectus femoris, hamstrings and hip abductor and adductor muscles (10,11,36). The kinetic consequence of mediolateral movement of the knee during a squat pattern is not as well understood. Those studies that have quantified mean torque during valgus and varus movement in the frontal plane generally use open chain movements (e.g., seated leg extension) not closed chain movements (e.g., bodyweight squat) (11). Therefore, further research is needed to investigate the kinematic and kinetic affects of valgus and varus patterns of movement during a closed chain squat pattern.

Figure 2:
(a) Squat pattern with a varus lower leg position. (b) Squat pattern with a valgus lower leg position.
Figure 3:
Squat pattern performed with excessive forward motion of the knees in front of the toes.

Extreme anterior motion of the knees, where the knees move past the toes, is not recommend because of the increased shear and compressive forces experienced at the knee (Figure 3) (21). However, restricting the knees to remain behind the toes during a squat resulted in an increase in anterior lean of the trunk and shank (21). An increase in the forward lean of the trunk has shown to increase the forces in the lumbar spine (21). Further research is needed to quantify the effects of anterior motion of the knees on the various joints and regions of the body to establish a safe guideline. Still, from the research reviewed, some forward motion of the knees, where they move slightly past the toes, is considered normal and necessary for a proper squat pattern to occur (21).

Additionally, a danger to the knee joint occurs when the center of rotation for knee flexion is altered (31), which may occur when the calf and the hamstrings muscles make contact during a deep squat (Figure 4a). The internal torque about the knee and hip occurs in the posterior direction during a deep squat given the majority of the athlete's mass is moving back and down. The torque about the hip and knee occurs posteriorly to the femur and, as a result, pulls back on the anterior cruciate ligament. If an athlete fails to control the descent of a deep squat and allows the hamstrings and calf muscles to make contact in a ballistic fashion, the posterior torque about the hip and knee has been reported to create a dislocating effect on the anterior cruciate ligament (31). However, if the athlete maintains good knee alignment with the hips and feet and controls the descent of the squat prohibiting the calves and hamstrings to make contact in a ballistic manner, the center of rotation at the knee is not affected (Figure 4b) (31).

Figure 4:
(a) Deep squat pattern with the hamstrings touching the calves at the bottom of the movement resulting in the center of rotation of the knee moving back to the area of contact. (b) A deep squat pattern performed with a controlled descent resulting in no contact between the hamstrings and calves musculature.


The hip joint is a ball-and-socket joint that is capable of motion in all 3 planes: sagittal (flexion and extension), frontal (abduction and adduction), and transverse (medial and lateral rotation) (22). Because of the hip joint's structure and anatomical function, the hip joint for obvious reasons is considered a mobility joint. One of the primary roles of the hip joint is to provide a pathway for transmission of forces between the lower extremities and pelvis during activities such as squatting (22). Hip range of motion is considerable with flexion between 0 and 135° and extension 0 and 15° (22). During a squat, mean hip range of motion has been reported to be 95 ± 27° of flexion (25). Hip range of motion can appear greater if pelvic and lumbar motion are allowed to take place during squatting (22,25). Posterior movement of the pelvis during the descent and lumbar flexion at the bottom of the squat are movement strategies that have been reported to allow for greater hip mobility (4,22,25,26,28,36). However, these strategies are not recommended because of the increased stress placed on the lumbar region of the spine. In addition, it has been reported that when an athlete lacks hip mobility, a compensatory pattern of movement is increased trunk flexion (31,32).

No studies were found that have quantified the forces about the hip when squatting with poor alignment (i.e., mediolateral rotation of the hip or lateral dipping of the hips). Nonetheless, the literature reviewed did report the effects of squatting with poor hip mobility (10,26,35,36). A study involving 22 healthy male and female adults measured the kinetics of the hip, knee, and ankle during a bilateral squat to a self-selected depth (SQ) and a squat to a chair (CSQ). The maximum hip flexion angle obtained from the CSQ was 7.2% greater than that of the SQ (p = 0.03) (20). Consequently, the maximum knee flexion and ankle dorsiflexion angles for the SQ were 20.4% (p = 0.005) and 70.7% (p = 0.001), greater than those obtained from CSQ (18).

Although the structure and function of the participant's hips were not assessed, it has been suggested that achieving a greater squat depth via increased knee flexion and ankle dorsiflexion is a compensatory strategy commonly observed in those individuals avoiding the weak musculature that supports hip flexion and extension (36). Therefore, when screening the squat, the strength and conditioning professional should observe the athlete achieving depth through their hips as an indicator of good mobility (12).


According to researchers, the angle of the trunk in relation to the ground should remain constant throughout the downward and upward phase of the squat movement demonstrating stability and control (5,28). When the trunk is screened, thoracic and lumbar flexion and extension (Figure 5a and 5b) are commonly reported faulty patterns (26,31,36). Given the prevalence of lower back pain and injuries experienced by athletes, it is critical that lumbar stability be maintained throughout the descent and ascent (Figure 5c) during an unloaded and loaded squat (32). When an athlete performs a squat and does not stabilize the lumbar spine and fails to maintain a straight or slightly extended thoracic spine position, an increase in compressive and shear forces of the lumbar spine has been observed (30-33). Squatting with an external load with excessive lumbar extension (curved back) dramatically increases compressive forces (Figure 5a) (40). A 2° increase in extension from a neutral spine position increased compressive stress within the posterior annulus by an average of 16% as compared with maintaining a neutral spine position (40). This is particularly important because researchers have found that athletes hyperextend to a significant degree when lifting heavier (60% and 80% of 1RM) loads (40). Further investigation demonstrated that the compressive strength of a vertebral body was reduced by 30% if 10 loading cycles were applied (2,7). Therefore, it is, suggested that when screening the trunk during the squat, lumbar stability in a neutral spine position and modest thoracic extension be encouraged to minimize excessive compressive and shear forces on the lumbar spine and promote a positive squat pattern (12,32,33,40).

Figure 5:
(a) A squat pattern with lumbar flexion present at the bottom of the movement. (b) A squat pattern with thoracic extension. (c) An athlete attempting to maintain neutral spine during a bilateral bodyweight squat.


There is a lack of research into the effects of head position on squat kinematics and kinetics. Of the research conducted, the authors found that when the head position and direction of gaze was directed downward, a significant increase in hip and trunk flexion was observed (Figure 6) (15). Movement of the head with a downward direction of gaze during the squat can increase trunk flexion by up to 4.5° (15). Therefore, the concern with maintaining proper direction of gaze and head alignment and minimizing head movement during squatting is to decrease the amount of lumbar and thoracic flexion. Because excessive hip and trunk flexion in the squat movement are contraindicated, any deviation of the head and direction of gaze below a neutral position is not recommended and may result in a faulty movement pattern of the hips and trunk (15,26,36).

Figure 6:
(a) Downward direction of gaze resulting in greater trunk flexion. (b) Neutral direction of gaze resulting in a more optimal trunk position.


There are a number of general considerations to deliberate if the reader is to use a bodyweight bilateral squat to screen an athlete's movement capability. We have outlined some questions and possible answers in Table 3. The answers to each of these questions should be adapted according to the skill level and age of the athlete being assessed. Further investigation may be directed toward addressing the following questions: Are joint kinematics and kinetics required to accurately screen a squat pattern? What is the reliability and validity of 3-dimensional analysis compared with a standard 2-dimensional video record captured by the strength and conditioning professional? What is the reliability of the squat for screening purposes and how many trials should be assessed to ensure reliable data are collected? When an athlete performs a good bodyweight bilateral squat what load should then be used to safely screen the squat pattern under stress? It is important that the strength and conditioning professional validly and reliably screen the squat pattern given its relevance to sport and sport specific training.

Table 3:
General considerations for assessing a squat movement pattern


The literature reviewed promoted foot stability, ankle mobility, knee stability, hip mobility, and trunk stability to enable an athlete to perform a squat pattern correctly. A foundational understanding of the kinematics and kinetics of the ankle, knee, hip, lumbar and thoracic spine, and head were detailed. It was reported that an athlete might use a variety of movement strategies to achieve a deep squat position. However, movement strategies that promote malalignment and poor body position may increase the compressive and shear forces at the ankle, knee, hip, and lumbar and thoracic spine. There are many exercises prescribed by strength and conditioning professionals that involve the squat pattern. Too often athletes are loaded above and beyond what their movement competency can support. A simple body weight bilateral squat can be used to screen the movement capability of an athlete before the strength and conditioning professional prescribes a program that substantially loads the squat pattern.


1. Abelbeck KG. Biomechanical model and evaluation of a linear motion squat type exercise. J Strength Cond Res 16: 516-524, 2002.
2. Adams MA and Dolan P. Recent advances in lumbar spine mechanics and their clinical significance. Clin Biomech (Bristol, Avon) 10: 3-19, 1995.
3. Adrian MJ and Cooper JM. Biomechanics of Human Movement (2nd ed). Dubuque: Wm. C. Brown Communications, 1995. pp. 135.
4. Alter MJ. Science of Flexibility (2nd ed). Champaign, IL: Human Kinetics, 1996. pp. 373.
5. Baechle TR, Earle RW, and Wathen D. Resistance training. In: Essentials of Strength Training and Conditioning. Baechle TR and Earle RW, eds. Champaign, IL: Human Kinetics, 2000. pp. 48.
6. Bloomfield J. Posture and proportionality in sport. In: Training in Sport: Applying Sport Science. Ellito, B. ed. New York: John Wiley & Sons, Inc., 1998. pp. 426.
7. Brinckmann P, Biggermann M, and Hilweg D. Fatigue fracture of human lumbar vertebrae. Clin Biomech (Bristol, Avon) (Suppl 1): 1-23, 1988.
8. Caterisano A, Moss RF, Pellinger TK, Woodruff K, Lewis VC, Booth W, and Khadra T. The effect of back squat depth on the EMG activity of 4 superficial hip and thigh muscles. J Strength Cond Res 16: 428-432, 2002.
9. Chek P. Movement That Matters. San Diego: C.H.E.K Institute, 2000. p. 54.
10. Cibulka MT and Threlkeld-Watkins J. Patellofemoral pain and asymmetrical hip rotation. Phys Ther 85: 1201-1207, 2005.
11. Claiborne TL, Armstrong CW, Gandhi V, and Pincivero DM. Relationship between hip and knee strength and knee valgus during a single leg squat. J Appl Biomech 22: 41-50, 2006.
12. Cook G. Athletic Body in Balance. Champaign, IL: Human Kinetics, 2003. p. 222.
13. Dahlkvist NJ, Mayo P, and Seedhom BB. Forces during squatting and rising from a deep squat. Eng Med 11: 69-76, 1982.
14. Dionisio VC, Almeida GL, Duarte M, and Hirata RP. Kinematic, kinetic and EMG patterns during downward squatting. J Electromyogr Kinesiol. 18: 134-143, 2006.
15. Donnelly DV, Berg WP, and Fiske DM. The effect of the direction of gaze on the kinematics of the squat exercise. J Strength Cond Res 20: 145-150, 2006.
16. Escamilla RF, Fleisig GS, Zheng N, Barrentine SW, Wilk KE, and Andrews JR. Biomechanics of the knee during closed kinetic chain and open kinetic chain exercises. Med Sci Sports Exerc 30: 556-569, 1998.
17. Escamilla RF, Lander JE, and Garhammer J. Biomechanics of powerlifting and weightlifting exercises. In: Exercise and Sport Science. Garrett WE and Kirkendall DT, eds. Philadelphia: Lippincott Williams & Wilkins, 2000. pp. 585.
18. Escamilla RF. Knee biomechanics of the dynamic squat exercise. Med Sci Sports Exerc 33: 127-141, 2001.
19. Escamilla RF, Fleisig GS, Lowry TM, Barrentine SW, and Andrews JR. A three-dimensional biomechanical analysis of the squat during varying stance widths. Med Sci Sports Exerc 33: 984-998. 2001.
20. Flanagan S, Salem GJ, Wang M, Sanker SE, and Greendale GA. Squatting exercises in older adults: Kinematic and kinetic comparisons. Med Sci Sports Exerc 35: 635-643, 2003.
21. Fry AC, Smith JC, and Schilling BK. Effect of knee position on hip and knee torques during the barbell squat. J Strength Cond Res 17: 629-633, 2003.
22. Hall CM and Brody LT. Therapeutic Exercise: Moving Toward Function (2nd ed). Philadelphia: Lippincott Williams and Wilkins, 2005. pp. 334.
23. Harman E. The biomechanics of resistance exercise. In: Essentials of Strength Training and Conditioning. Baechle TR and Earle RW, eds. Champaign, IL: Human Kinetics, 2000. pp. 657.
24. Hattin HC, Pierrynowski MR, and Ball KA. Effect of load, cadence, and fatigue on tibio-femoral joint force during a half squat. Med Sci Sports Exerc 21: 613-618. 1989.
25. Hemmerich A, Brown H, Smith S, Marthandam SSK, and Wyss UP. Hip, knee and ankle kinematics of high range of motion activities of daily living. J Orthop Res 24: 770-781, 2006.
26. Kendall FP, Mccreary EK, Provance PG, Rodgers MM, and Romani WA. Muscles Testing and Function With Posture and Pain (5th ed). Baltimore: Lippincott Williams & Wilkins, 2005. pp. 480.
27. Keogh J, Hume PA, and Pearson S. Retrospective injury epidemiology of one hundred one competitive Oceania power lifters: The effects of age, body mass, competitive standard, and gender. J Strength Cond Res 20: 672-681, 2006.
28. Kinakin K. Optimal Muscle Testing. Champaign: Human Kinetics, 2004. pp. 122.
29. Kingma I, Bosch T, Bruins L, and Van Dieen JH. Foot positioning instruction, initial vertical load position and lifting technique: Effects on low back loading. Ergonomics 47: 1365-1385, 2004.
30. Kovacs I, Tihanyi J, Devita P, Racz L, Barrier J, and Hortobagyi T. Foot placement modifies kinematics and kinetics during drop jumping. Med Sci Sports Exerc 31: 708-716, 1999.
31. Kreighbaum E and Barthels KM. Biomechanics;A Qualitative Approach for Studying Human Movement (4th ed). Spivey, S. ed. Needham, MA: A Pearson Education Company, 1996. pp. 619.
32. McGill S. Ultimate Back Fitness and Performance (3rd ed). Waterloo: Wabuno, Backfitpro, Inc., 2006. pp. 311.
33. McGill SM. The influence of lordosis on axial trunk torque and trunk muscle myoelectric activity. Spine 17: 1187-1193, 1992.
34. Newton RU, Gerber A, Nimphius S, Shim JK, Doan BK, Robertson M, Pearson DR, Craig BW, Hakkinen K, and Kraemer WJ. Determination of functional strength imbalance of the lower extremities. J Strength Cond Res 20: 971-977, 2006.
35. Osternig LR, Ferber R, Mercer J, and Davis H. Human hip and knee torque accommodations to anterior cruciate ligament dysfunction. Eur J Appl Physiol 83: 71-76, 2000.
36. Sahrmann SA. Diagnosis and Treatment of Movement Impairment Syndromes. St. Louis: Mosby, 2002. pp. 460.
37. Salem GJ, Salinas R, and Harding FV. Bilateral kinematic and kinetic analysis of the squat exercise after anterior cruciate ligament reconstruction. Arch Phys Med Rehabil 84: 1211-1216, 2003.
38. Toutoungi DE, Lu TW, Leardini A, Catani F, and O'Connor JJ. Cruciate ligament forces in the human knee during rehabilitation exercises. Clin Biomech (Bristol, Avon) 15: 176-187, 2000.
39. Vickerstaff JA, Miles AW, and Cunningham JL. A brief history of total ankle replacement and a review of the current status. Med Eng Phy 29: 1056-1064, 2007.
40. Walsh JC, Quinlan JF, Stapleton R, Fitzpatrick DP, and McCormack D. Three-dimensional motion analysis of the lumbar spine during “free squat” weight lift training. Am J Sports Med 35: 927-932, 2007.
41. Wilk KE, Escamilla RF, Fleisig GS, Barrentine SW, Andrews JR, and Boyd ML. A comparison of tibiofemoral joint forces and electromyographic activity during open and closed kinetic chain exercises. Am J Sports Med 24: 518-527, 1996.
No Caption Available

assessment; functional; injury; kinetics; kinematics

© 2009 National Strength and Conditioning Association