The ability to express high-power outputs is an important factor that can differentiate between athletes at various levels. In sports like American football, the ability to express high levels of maximum strength, power, and speed appears to explain many of the differences between levels of play, playing abilities, and position (11,45,90 11,45,90 11,45,90). For example, Barker et al. (11) noted that starters were stronger, more powerful, and faster than nonstarters. Similarly, Fry and Kraemer (45) reported that Division I football players were on average stronger, more powerful, and faster than their Division II and Division III counterparts. When examining high school football players, Dupler et al. (33) demonstrated that speed, power, and agility are higher in varsity high school football players when compared with junior varsity and freshman players. Similarly, as collegiate football players progress from their freshman to senior year of play, strength levels significantly increase, as does power output (69). Taken collectively, it is clear that regardless of the level of play, the ability to express strength, power, speed, and agility are central characteristics when training football players.
When considering strength, power, speed, and agility, it is important to understand that these specific characteristics are all intimately related. For example, strength should be considered the foundation for power output, speed, and the ability to change direction (Figure 1) (20,30,66 20,30,66 20,30,66). In support of this contention, Bret et al. (18) report that 100 m running performance is significantly related to concentric half-squat (r = 0.74, p < 0.01) and countermovement jump displacement (r = 0.57, p < 0.05), which can be considered as indicators of strength and power characteristics. Improvements in strength appear to play a role in increasing the ability to accelerate (31) in the early part of a sprint. Because improvements in strength and power-generating capacity can result in an increased ability to accelerate, it is likely that these adaptations can lead to an increased ability to change direction (127) as this ability is highly reliant on the ability to reaccelerate and apply forces rapidly. Based on this line of reasoning, there seems to be an interrelationship between muscular strength, sprint performance, and change of direction speed (66). Support for this contention can be found in the work of Hori et al. (66) where hang power clean performance was reported to be significantly correlated with jumping (r = 0.41, p < 0.05), 20-m sprint time (r = −0.058, p < 0.01), and change of direction speed (r = −0.41, p < 0.05). Additionally, the 1RM front squat demonstrates significant correlations with 20-m sprint time (r = −0.60, p < 0.01) and change of direction speed (r = −0.51, p < 0.01). Taken collectively, it is clear that the ability to express high-power outputs is dependent on the athletes overall level of strength and improvements in power output, speed, and change of direction speed are related to improvements in maximum muscular strength.
The type of program used appears to strongly influence the ability to develop the performance foundation necessary for success in football. Hoffman et al. (63,64 63,64) suggest that simply performing heavy-loaded resistance exercises, consistently, like those typically used in the sport of powerlifting does not optimize football performance. Instead, it is suggested that the inclusion of weightlifting exercises that target explosive strength, such as the power clean and power snatch, are essential components of the training plan and result in greater overall improvements in leg strength, explosiveness, and running speed. Additional support for these findings can be found in the work of Tricoli et al. (117) who report that combinations of heavy resistance training and jump training produce less than optimal results compared with weightlifting exercises combined with jump training when examining strength and jumping performance. As a whole, these data seem to suggest that training with a combination of activities that target the development of both maximal strength and explosive strength, such as weightlifting, is necessary for the maximization of power-generating capacity and the optimization of football playing ability (55).
Therefore, the primary purposes of this brief review are to (a) define power, (b) discuss the physiological factors that contribute to power-generating capacity, (c) examine the role strength plays in power generation, (d) discuss periodization models that can facilitate power development, and (e) present specialized methods that can be used to maximize power development.
DEFINING POWER OUTPUT
Mechanical power output can be defined as the rate of performing work or the product of force and velocity (73,110 73,110). Typically, power can be calculated with one of the following equations (73):
When examining the relationship between force and velocity, it is clear that the ability to develop high levels of force is important when attempting to maximize power output. Although they are related, it is likely that there are limits in one's ability to increase unloaded movement velocity and that there is a greater potential for increasing muscular strength. Because power-generating capacity is based on the ability to express both force and velocity, both of these factors need to be considered in any training program that attempts to develop muscular power (55).
When examining muscular power, it is important that one considers the highest instantaneous power found during a range of motion, under a given set of conditions, as representing the individual's peak power. Peak power-generating capacity is typically related to success in explosive activities such as jumping, sprinting, and weightlifting movements (19,45,49,83,112 19,45,49,83,112 19,45,49,83,112 19,45,49,83,112 19,45,49,83,112). Because these activities are also related to football playing ability (11,45 11,45), it is clear that training interventions designed to enhance success in football must target the development of peak power output.
In sports like football, the ability to repetitively express peak power outputs also appears to be of particular importance (89). This ability should be considered as a function of the athlete's high-intensity exercise endurance. It is important to realize that in sports like football, the ability to express high-power outputs should not be compromised by efforts to improve endurance, particularly low-intensity exercise endurance activities such as aerobic exercise or excessive conditioning. A far better approach is to engage in training activities that first elevate strength and then maximize power outputs, while engaging in conditioning activities that help to enhance the ability to express these higher power outputs in a repetitive fashion (61).
PHYSIOLOGICAL BASIS FOR THE EXPRESSION OF HIGH-POWER OUTPUTS
When examining the literature, there are a wide variety of possible neuromuscular factors that can contribute to the ability to produce high-power outputs (57,73,87,99 57,73,87,99 57,73,87,99 57,73,87,99).
Neural Factors That Affect Power Output
The ability to recruit, rate code, and synchronize motor units plays a distinct role in the ability to generate high-power outputs (57,73,87,99 57,73,87,99 57,73,87,99 57,73,87,99). To express higher power outputs, the ability to recruit the high threshold motor units associated with type II muscle fibers must occur. Typically, these motor units are maximally activated when the athlete performs either high-force or high-power output training activities (57). Some untrained or weaker athletes may not be able to effectively recruit these motor units (57,99 57,99). The application of appropriate resistance training activities can facilitate this ability and thus result in an improved power-generating capacity (73).
The recruitment of motor units usually follows the size principle, with smaller motor units being recruited first, whereas larger motor units are recruited later; it is possible that specific training interventions can alter this basic recruitment pattern (57,99 57,99). For example, the use of ballistic or explosive exercises, like those seen in weightlifting, has the potential to recruit the higher threshold motor units (57,73 57,73) by improving the ability to recruit these motor units sooner or more efficiently (73). A second neural factor, which contributes to the ability to express a higher power output, is the ability to rate code or change the motor unit firing rate. One of the major benefits of explosive training using exercises such as those noted in weightlifting (57) is an ability to increase the rate coding of motor units that can lead to an increased ability to express high rates of force development, which can contribute to higher power production (73). Specifically, the greater the motor unit firing rate, the greater the force output up to a certain point (99). Once the motor unit's maximal force-generating capacity is reached, increased rate coding then continues to contribute to an increase in the rate of force development (1,99 1,99). The ability to increase the rate of force development is considered to be important when working with high-power movements, such as jumping and change of direction activities, because of the limited time for force application during these types of movements (78,99 78,99). It is clear that the ability to increase the rate of force development is an important training adaptation, which can contribute to the ability to generate high-power outputs. In fact, the high rates of force development are often related to power outputs during jumping activities (53,56 53,56) and weightlifting performance (53). One potential explanation for these relationships is that training with explosive exercise can increase the ability to synchronize motor unit firing (73), which can increase the rate of force development (104,105,119 104,105,119 104,105,119) and ultimately contribute to a greater power output, particularly in ballistic movements.
Muscular Factors That Affect Power Output
The muscle's cross-sectional area and fiber type appear to contribute to an athlete's ability to express higher power outputs. It is well documented in the scientific literature that an increase in muscle cross-sectional area can contribute to increased strength gains (40,86,93,128 40,86,93,128 40,86,93,128 40,86,93,128). Conceptually, Minetti (86) suggest that increases in cross-sectional area lead to changes in force production capabilities, which then serve as the foundation for the expression of high-power outputs. Additionally, muscular architecture changes that underlie the hypertrophic changes to the muscle can play a role in the relationship between cross-sectional area and power generation (96). For example, when sarcomeres are added in series, a resultant increase in the velocity of shortening during contraction can occur, whereas the addition of sarcomeres in parallel results in a significant increase in force-generating capacity (35). The type of contraction used during resistance training can modulate how the sarcomeres are added and their contribution to the muscle cross-sectional area. Specifically, activities that use a large amount of stretch to the muscle, like plyometrics and weightlifting exercises that significantly engage the stretch-shortening cycle (SSC), have the potential to significantly increase the number of sarcomeres added in series, whereas combinations of eccentric and concentric muscle actions result in a significantly larger increase in the number of sarcomeres in parallel (96). Collectively, these data suggest that there is an orderly process by which resistance training can be used to alter the skeletal muscle size and architecture to optimize the muscle machinery necessary for producing peak powers.
A second factor that contributes to a muscle's ability to generate power is its fiber type (Figure 2) (29,39 29,39). Type II muscle fibers express a higher velocity of shortening, force output, and power output when compared with type I fibers (39,60 39,60). Additionally, the muscle's ability to generate peak power outputs is significantly correlated with the individual's percentage of type II fibers and particularly with total type II cross-sectional area (29). Indeed, it is quite advantageous to have a high type II:I fiber type ratio. One possible explanation for the peak power output of the type II fibers exceeding the type I fibers is related to the overall higher cross-bridge cycling rate possessed by these fibers (16,17 16,17). Additionally, the higher cross-bridge cycling rate attained by the type II fibers has been suggested to be a major contributing factor in the ability to express maximal rates of force development (41). Based on these relationships, it is clear that the muscle fiber type composition is tightly related to the rate of force development (16,17 16,17), the individual's maximal force-generating capacity (3), and the overall power-generating capacity.
From a training perspective, the muscle fiber type exhibits an ability to be shifted in response to training (116,124 116,124), which can exert a significant impact on the overall percentage of type II fibers, as well as the concentration and size of individual isoforms of the type II fibers (type IIa and IIx). Ultimately, these shifts in fiber type can exert an influence on the ability to express maximal force, high rates of force development, and express high-power outputs. Therefore, it is important that specific training activities are logically and systematically implemented to maximize muscular adaptations that can facilitate power generation. If, for example, aerobic training (or very high volumes of any type of training) is used as a conditioning activity for football players, there will be a fiber type shift toward the type I (115), which will result in a concomitant reduction in peak power-generating capacity (36), the rate of force development (4,58 4,58), and maximal strength. Based on the work of Minetti (86) and Zamparo et al. (128), it seems logical to target muscle hypertrophy, then muscular strength, and then power output optimization. As such, the muscle will increase its cross-sectional area, then its maximal strength, and then its power-generating capacity.
STRENGTH IS THE BASIS FOR POWER DEVELOPMENT
When considering the ability to develop power, it is very clear that high levels of muscular strength are a key factor dictating how powerful an individual can become (108). When examining cross-sectional studies, it is evident that stronger athletes possess a superior ability to express high-power outputs compared with weaker athletes (10,26,78,83,102,103,118 10,26,78,83,102,103,118 10,26,78,83,102,103,118 10,26,78,83,102,103,118 10,26,78,83,102,103,118 10,26,78,83,102,103,118 10,26,78,83,102,103,118). In fact, Zamparo et al. (128) suggest that maximizing muscular strength is a crucial element when attempting to optimize power generation adaptations. Furthermore, Minetti (86) suggests that the development of maximal power-generating capacity is a 3-step process, which starts with attempts to increase the muscle's cross-sectional area and then transitions to a focus on the maximization of muscular strength before targeting power development. Recent work by Cormie et al. (27,28 27,28) supports these contentions by offering evidence of the importance of developing high levels of strength before targeting specific power developing activities. Specifically, Cormie et al. (27) demonstrate that in relatively weak individuals (1RM back squat ≤ 1.5 × body mass), the performance of activities that specifically target the development of maximal strength is more effective than training which specifically emphasizes power generation when attempting to maximize the expression of high-power outputs. Additionally, Cormie et al. (28) noted that the effect of training and the magnitude of performance gain in response to 10 weeks of ballistic power training were higher in stronger individuals (back squat = 1.97 ± 0.08 1 repetition maximum [1RM] kg·body mass−1) when compared with weaker athletes (back squat = 1.32 ± 0.14 1RM kg·body mass−1) who undertook identical training interventions. Ultimately, it is highly probable that targeting maximal strength development is of primary concern with young or less developed football players (middle school, high school, and college). Some evidence indicates that to optimize power training effects, a minimum back squat (thighs below parallel) of 2 × body mass may be necessary before engaging in specific resistance training exercises that target power development (28,55,97,102 28,55,97,102 28,55,97,102 28,55,97,102).
Although one fitness component can be emphasized at times, when training athletes, including football players, it is very unlikely that only one training factor, strength or power, is contained in the training plan. It appears that combinations of strength and power training that are performed at various loads have the potential to maximize the physiological and performance adaptations induced by the training plan (26,114,117 26,114,117 26,114,117). Examination of the combination of strength-power training indicates that including both strength and power training activities in the overall training plan will result in superior gains in power output and potentially result in a greater transfer of training effect. Tricoli et al. (117) clearly demonstrate that using weightlifting exercises, such as the power clean, clean and jerk, and high pulls, combined with jump training results in superior training-induced adaptive responses when compared with heavy resistance training and jump training when used by football players. Additionally, using various training loads that include both light and heavy loadings appears to further optimize power generation and movement velocities (114). Even with light loads, such as those typically used in warm-up sets, a conscious effort to move quickly or be explosive is imperative (55). Conceptually, using warm-up sets with various loads before undertaking target sets can result in training, which works various parts of the force-velocity, force-power, and velocity-power curves.
Another consideration when examining the football player's strength levels may be related to the effect of the competitive season on the athlete's strength and power-generating capacity (5,65 5,65). One particular concern is that if inadequate time targeting the maintenance of maximal strength is spent during the competitive season, a concomitant reduction in power output and speed can occur (5). Hoffman et al. (65) suggest that combinations of weightlifting, heavy strength training, and power training have the ability to maintain or slow the potential reductions in strength and power across a football season. In a recent article by McMaster et al. (85), it is noted that strength levels can be maintained for at most 3 weeks with no resistance training, but as time progresses past this point, there is an increased decay rate for strength. Similarly, Cormie et al. (28) demonstrated incremental decreases in muscular strength after 5 weeks of only ballistic strength training. To counteract this decline in strength, a minimum of 1–2 heavy-loaded strength training (75–85% 1RM) sessions per training week in season is recommended (85). When looking at the in-season training programs for experienced football players, it may be necessary to periodically increase training volume and/or introduce higher training loads to maintain strength and power capacities (5,110 5,110). Support for this contention can be found in the work of McMaster et al. (85) who report that greater training dosages may be required periodically to maintain strength and power, whereas the base maintenance program could be centered on 3–5 sets of 4–6 repetitions performed in the intensity range of 75–85% of 1RM.
Based on the current scientific body of knowledge, it is apparent that increasing muscular strength is essential for the maximization of power development. Additionally, it appears that combinations of weightlifting-based training exercises performed in conjunction with plyometric or jump training optimize both strength and power development capacities. Finally, although these targets are typical in the off-season, it is increasingly important to incorporate training activities in-season that are designed to maintain maximal strength. Ideally, the use of periodized modeling, which systematically targets strength development and combinations of strength and power training, appear to be essential components of the off-season and in-season training practices of football players.
PERIODIZATION MODELS FOR POWER DEVELOPMENT
When examining the periodization literature, it is clearly evident that periodization is defined as a logical systematic integration and sequencing of specific training factors into mutually dependent periods of time, which are designed to result in an optimization of very specific physiological and performance outcomes at predetermined time points (14,15,52,54,67,68,89,120 14,15,52,54,67,68,89,120 14,15,52,54,67,68,89,120 14,15,52,54,67,68,89,120 14,15,52,54,67,68,89,120 14,15,52,54,67,68,89,120 14,15,52,54,67,68,89,120 14,15,52,54,67,68,89,120). To accomplish the primary goal of elevating performance, it is essential that the periodized plan contains appropriate variation, which serves to manage fatigue while enhancing adaptive responses. Typically, variation, particularly in the resistance training literature, is considered in a very narrow scope centering on only variations in loading schemes and essentially examining programming rather than periodization (42–44,75–77 42–44,75–77 42–44,75–77 42–44,75–77 42–44,75–77 42–44,75–77). Variation must be considered in a greater scope to also include the training foci, exercise selection, and the density of training (79,106,110,130 79,106,110,130 79,106,110,130 79,106,110,130). Excessive or unplanned variation must be avoided as the application of variation in this fashion will limit the training plan's overall effectiveness (110). Ultimately, the training plan needs to vary training in a sequential and integrative fashion to modulate the training response to maximize performance.
To maximize power output, it is essential that a sequential and integrated periodized approach is used when working with football players. Based on the work of Minetti (86) and Zamparo et al. (128), it is very clear that the annual plan should have periods, which first target the development of cross-sectional area after which the training focus should transition toward strength development, followed by focusing on power development. Harris et al. (61) used this basic approach with division IAA football players to maximize training adaptations. After a 4-week strength-endurance phase, 3 different training interventions were undertaken 4 days per week across a 9-week training period. One group targeted maximal strength development, 1 targeted power development, and the third group was a combination or sequential training group, which performed 5 weeks of training targeting maximal strength development, whereas the last 4 weeks focused on high-power output training. When examining markers of performance typically associated with football playing ability, the group that sequenced high-force and high-power training resulted in superior performance gains. For example, significantly greater improvements in maximal strength, as indicated by the back squat (11.6%⇑) and 1/4 back squat (37.7%⇑), were determined for the sequenced group. Additionally, when looking at sprinting speed, only the group that sequenced training resulted in increases in sprinting ability as indicated by decreases in time across 10 yd (2.3%⇓) and 30 m (1.4%⇓). As a whole, the work of Harris et al. (61) supports the contentions of Minetti (86) and Zamparo et al. (128) in which power is optimally developed by a sequential training approach. Collectively, these data support the contention that the maximization of performance is achieved with sequential periodization models.
Although a complete discussion of periodization models is out of the scope of this article, it should be noted that the sequential models proposed by Stone et al. (107), Issurin (67,68 67,68), Bompa and Haff (13), Haff and Haff (54), and Verkoshansky (121,122 121,122) appear to offer methods that are well suited for the development of the football player. Ultimately, based on these works, the annual training plan should be broken into periods that target muscular hypertrophy, maximal strength, and power development. Central to the effectiveness of this training structure is the ability to integrate complimentary training factors and sequence the development of physiological and performance adaptations.
SPECIALIZED METHODS FOR DEVELOPING POWER
Regardless of the exact periodization model that is used, specific training interventions can be used to optimize power output. These methods include a vast array of activities including (a) weightlifting exercises, (b) plyometric exercises, (c) explosive exercise training, and (d) strength-power potentiating complexes (SPPC).
As noted previously, Hoffman et al. (64) suggest that weightlifting movements and their derivatives produce greater performance gains when used with football players. The fact that weightlifting movements translate into greater strength/power and speed performance is not unexpected. McBride et al. (83) and Stone et al. (108) compared the strength and power-generating characteristics of weightlifters with a variety of other strength-power athletes (e.g., powerlifters, wrestlers, sprinters, etc.) and noted that the weightlifters displayed significantly higher 1RMs in the back squat and higher power outputs during jumping activities. When examined in conjunction with jump and resistance training, which targeted maximum strength development, Tricoli et al. (117) demonstrated that the inclusion of weightlifting movements resulted in greater improvements in markers of speed, agility, and power development in performance tests, which are typically used when evaluating football players (static jump, countermovement jump, 10 and 30 m sprint, and agility testing).
Collectively, these results may be expected because the exercises used by weightlifters tend to target strength-power development. For example, classic work by Garhammer (46,49 46,49) suggests that during the pulling motion of the snatch and clean, power outputs on the magnitude of 80 W/kg can be achieved during the second pull while lifting considerable loads. When examining the drive portion of the jerk, power outputs on the magnitude of 56 W/kg can be generated depending on the load being used (46,48 46,48). In fact, the power outputs achieved during these lifts are significantly higher than those observed in the deadlift, bench press, or squat and are comparable with those achieved during jumping motions (Table 1).
One important caveat that must be considered when incorporating weightlifting exercises is that time must be spent optimizing the football player's technical proficiency with each of the weightlifting movements. Specific focus must be directed at the double knee bend to maximize the athlete's ability to engage the SSC and as such maximize the transferability of the exercise to the field of play (37,71 37,71). The double knee bend as a technique requires the rebending of the knee as the barbell passes across the knee joint, thus applying an eccentric stretch, which stores elastic energy in the series elastic components of the muscle before a rapid explosive extension of both the knees and hips. This technique is essential to the transferability of weightlifting movements to football playing ability. As such, lifts such as the pull, power clean, power snatch, clean and snatch performed from the floor or knee high blocks allow for the engagement of the double knee bend. Typically, football players often only perform the power clean from the hanging position at the midthigh or power position. Although this exercise is excellent, it may not be optimal for all periods of training because it does not use the double knee bend or maximally activate the SSC. Because of this, depending on the load, it is not uncommon to see significantly lower power outputs when comparing lifts from the floor to those performed in the hanging position (∼56% of maximal power) or from thigh high blocks (∼60% of maximal power) (Table 1). Therefore, strength coaches should consider that performing pulls, power cleans, power snatches, snatches, or cleans from the floor to be a critical tool in the development of power-generating capacity, which can be used throughout the training year.
When looking at the development of power and jumping performance, an often-overlooked exercise is the jerk. During the drive phase of the jerking movement, the power output achieved is comparable with that seen during the second pull position, which occurs after the double knee bend in the snatch and clean pull (46). Recently, work by Cleather et al. (24) suggests that jerking movements may have an important role in improving vertical jump performance. Specifically, athletes select either a hip or knee dominant jumping strategy based on their relative strengths and weaknesses. With hip dominant jumpers, it may be warranted to increase knee moment capacities with the use of exercises that are knee dominant, whereas in knee dominant jumpers, this performance characteristic may need to be reinforced. One exercise that appears to be effective at creating knee moments is the jerk. Similarly, the push jerk motion seems to also create a favorable knee joint loading pattern, which may be of use in developing vertical power-generating capacity. Although these data are relatively new and training studies using these methods are limited, the biomechanical similarity between the drive phase of the jerk and push jerk suggests that the jerking movements are an important training tool for the development of power.
Overall, it is very clear that weightlifting movements are superior in laying down the foundation for the expression of high-power outputs, improving vertical jumping ability, increasing running speed, and maximizing change of direction speed. Because all of these factors are related to football playing ability, it is very evident that weightlifting movements should represent a large portion of the training exercises used by football players.
Plyometric or SSC exercises are a very popular training tool for the development of explosive strength and power in a wide variety of athletes. Conceptually, these exercises capitalize on the ability of the SSC to augment force production and enhance performance (23). As a whole, SSC can be classified as either slow (ground contact >0.25 seconds) or fast (<0.25 seconds) (101). Regardless of the SSC classification, the application of the prestretch enhances force production and performance during the concentric muscle action when compared with situations where no stretch is applied (12,95 12,95). The application of the prestretches' ability to magnify force production is largely related to (a) the time allotted for the development of force, (b) the ability to store and use elastic energy, (c) the potentiation of contractile machinery, (d) the interaction between the series elastic components and the contractile machinery, and (e) the engagement of reflex actions (23,81 23,81). Although a complete discussion of these mechanisms is outside the scope of this article, it is important to understand that the contribution of these factors to the enhancement of muscle performance is different when comparing the slow and fast SSC.
The most common method to quantify the activation of the slow SSC is to calculate the prestretch augmentation or eccentric utilization ratio during jumping movements (81,84 81,84). This is accomplished by performing a countermovement vertical jump (CMJ) and a static vertical jump (SJ) test and using one of the following equations to estimate the utilization of the SSC:
When examining fast SSC, an assessment of reactive strength is often used in which the drop jump height, flight time, and the ground contact time are determined and used with one of the following formulas:
As a whole, the type of plyometric exercise used in training contributes to the ability of these exercises to enhance both slow and fast SSC muscle actions (23).
Traditionally, plyometric exercises involve using body weight jumping activities and/or throwing medicine balls in an attempt to engage the SSC (81) and bridge the gap between strength and speed (23). Plyometric exercises accomplish this in a triphasic pattern in which an eccentric muscle action, an amortization/coupling phase, and a concentric muscle action are sequenced (23).
During the eccentric phase, which is sometimes referred to as the loading phase (23), a stretch is applied to the agonist muscle. This stretch serves to engage the major mechanisms associated with the SSC, including (a) muscle potentiation, where stretching an active muscle or returning the muscle nearer to its optimum length results in an increased proportion of actin-myosin cross-bridge attachments and a decrease in cross-bridge detachment rate and results in a higher force from which to start the concentric action (94,95 94,95), (b) an increased activation of the muscle spindle (23) where excitatory feedback is applied to the agonist resulting in the engagement of the myotatic or stretch reflex (23), and (c) the storage of elastic energy in the series elastic components of the muscle (23,81 23,81). The ability to engage these mechanisms ultimately prepares the muscle for the subsequent concentric muscle action that occurs after the athlete transitions from eccentric to concentric phases.
Once the muscle has been loaded, the transition phase, which is commonly termed the amortization/coupling phase, is initiated (23). The coupling phase is a period of time in which there is a quasi-isometric muscle action that serves to interlink or couple the eccentric and concentric muscle actions contained in the plyometric activity. If the athlete does not possess adequate strength levels, the time frame for this coupling phase can be exaggerated and results in most of the benefits of the SSC being lost (23,125 23,125). Similarly, the benefits of the SSC can also be obviated when the athlete is under high levels of fatigue that can contribute to the extension of the coupling phase (38), thus dissipating the benefits of the SSC. Conceptually, the level of muscular strength may be related to the ability to break during the eccentric/loading phase, where significant deceleration forces are experienced, and then change direction during the coupling phase as the athlete moves into a concentric muscle action in a continuous fashion.
After completing the coupling phase, the athlete rapidly performs a concentric muscle action, which is often considered the propulsion phase (23). In this phase, the benefits initiated by the loading phase are used to increase the overall efficiency of force application and results in higher levels of power production. As noted previously, if the coupling phase is too long in duration, the benefits of the loading phase will be lost and the concentric power output will not be maximized. As a whole, the scientific literature clearly supports the use of plyometric training methods in an attempt to improve power output (80). It appears the effectiveness of plyometric training is dependent on the type of exercises used, its integration into the training plan, and the overall strength levels of the athletes using these exercises (81,98,117 81,98,117 81,98,117).
Numerous studies have clearly indicated that plyometric training, especially when coupled with weightlifting exercises, can result in improvements in neuromuscular control and movement efficiency during high impact activities such as cutting and landing and have the potential to reduce the risk for lower extremity injuries in team sports (81,98 81,98). Markovic (80) suggest that plyometric training results in a 4.7% (95% confidence interval [CI], 1.8–7.6) increase in static jump height, a 8.7% (95% CI, 7.0–10.4) increase in countermovement jump height, and a 4.7% (95% CI, 0.8–8.6) increase in reactive jump performance (depth jumping). As a whole, power output can be increased by 2.4–31.3% with a properly designed plyometric program. When the plyometric program is integrated with a periodized resistance training program, the power development benefits can be significantly magnified (81,98,117 81,98,117 81,98,117).
Based on the literature, it is apparent that plyometric training can be an important part of a football player's preparation. Specifically, plyometric exercises create a linking between strength and speed of movement. There are numerous plyometric exercises that can be used in training, which provide a wide range of training stimuli (see Radcliffe and Farentinos (91) for examples). When looking at using these types of exercises, it is important to remember that strength levels serve as the foundation for the optimization of their use. Considering the models presented by Minetti (86) and Zamparo et al. (128), these types of exercises probably are best initiated late in the phase of training where strength begins to be emphasized and then are more important in the strength and power phase of the periodized training plan. The importance of strength for plyometric activities is also echoed in the common recommendation that football players be able to squat a minimum of 1.5–2.0 × body mass or perform a squat 5 times in 5 seconds with a 60% body weight load before being able to perform plyometrics (23,123 23,123). When performing upper body plyometrics, it is recommended that the football player should be able to bench their body weight or perform 5 hand clap push-ups (123). Based on these guidelines and the underlying mechanisms associated with effective employment of plyometric exercises, it is clear that the football player should spend significant time striving to develop maximal strength levels to optimize the foundation from which power and speed are developed.
EXPLOSIVE EXERCISE TRAINING
Explosive exercises such as the weighted jump squats and bench press throws can be beneficial when attempting to elevate a football player's power-generating capacity. Overall, it is well established that stronger individuals have higher power-generating capacities and that increases in strength parallel increases in power-generating capacity (9). However, it appears that weaker individuals can increase power output without focusing on specific power-based training such as weighted jump squats (28). When looking at jump squat training, Cormie et al. (28) clearly demonstrate that with weaker athletes (<1.5 × body mass in the back squat 1RM) focusing on strength development is equally effective at improving jumping performance when compared with specialized power development training. With stronger individuals (≥1.7 × body mass back squat 1RM), it was noted that specialized power-based training (weighted jump squats) resulted in a more pronounced improvement in power-generating abilities when compared with weaker individuals.
Typically, it has been reported that power output is highest in the jump squat at a 0 kg load (25), which would essentially make the jump squat an unloaded plyometric activity (see discussion on plyometrics). Although methodological differences may play a role, several researchers have clearly demonstrated that with stronger athletes, such as advanced football players, having a back squat 1RM ≥ 1.7 × body mass, that power output is optimized at higher loads (5,8,32,83,108 5,8,32,83,108 5,8,32,83,108 5,8,32,83,108 5,8,32,83,108). For example, Baker et al. (8) report that with elite rugby players (back squat 1RM ≥ 1.8 × body mass), power output is maximized at loads between 47 and 63% of the 1RM back squat. Similarly, Stone et al. (108) reported that power output was optimized at 30–40% of 1RM in athletes whose 1RM back squat is ≥ 2.00 × body mass.
When examining the bench press throw, it is clear that strength levels also play a role in the determination of the optimal load (111). Thomas et al. (111) suggest that the optimal load corresponds to around 30% of the 1RM bench press in individuals who could bench 1.1 × body mass. When examining stronger athletes (bench press 1RM = 1.4 × body mass), the percentage of 1RM that optimal load occurs at increases to somewhere between 46 and 62% (7). In fact, well-trained or stronger athletes exhibit significantly higher power outputs than their weaker counter parts (6).
Conceptually, it is very likely that increasing muscular strength results in a rightward shift of the strength-power relationship because the stronger athlete can express higher velocities of movement with higher forces. Taken collectively, the literature clearly indicates that weaker individuals need to develop an appropriate strength base, and as they get stronger, specialized power training can be used with loading paradigms that consider the athletes overall strength. If integrated into a periodized training plan, it is likely that including these specific power-based exercises with an appropriate load can maintain power output in team sport athletes during a season (88).
STRENGTH-POWER POTENTIATING COMPLEXES
SPPC or a “complex pair,” as they are sometimes called, is a technique used by advanced athletes to maximize power outputs (62). The most basic form of an SPPC involves the performance of a high-force (51) or high-power (92,103 92,103) conditioning activity before the performance of a high-power or high-velocity movement such as a plyometric exercise or an explosive lift (Figure 3, Table 2). For example, a heavy-loaded back squat can be used to potentiate a vertical jump performance (22,82 22,82) or a power clean can be used to potentiate a sprint performance (103). Additionally, the combination of ascending back squats where the load is progressively raised to a high level has been shown to increase performance during horizontal plyometrics (97), vertical jumping (50,102 50,102), and sprinting performance (82,126 82,126).
In a classic study, Radcliffe and Radcliffe (92) demonstrated that incorporation of the power snatch in an SPPC resulted in significantly greater horizontal jumping performance than using back squat exercises. Similarly, Seitz et al. (103) recently reported that SPPCs that contain power cleans as the conditioning activity result in significantly greater sprint performance gains. Therefore, depending on the training phase, SPPCs can be created with either heavy load or high-power activities, serving as the conditioning activity for high-speed or high-power performances.
Overall, the volume and intensity of the conditioning will dictate the duration necessary before the performance of the subsequent high-power or speed performance. In most instances, fatigue is dominant in the first 3 minutes after a conditioning activity, but by 5 minutes, performance benefits can be noted (21). If the conditioning activity creates larger amounts of fatigue, the time frame before the high-power or speed performance can be extended to 8–15 minutes (22,74 22,74). It is important to note that stronger athletes will be able to dissipate the accumulated fatigue at a much faster rate than their weaker counterparts (70,102 70,102). For example, Seitz et al. (102) report that stronger individuals (back squat 1RM ≥ 2.0 × body mass) express a postactivation potentiation response as early a 3-minutes postconditioning activity, whereas weaker individuals (back squat 1RM < 2.0 × body mass) do not display significant postactivation potentiation responses until 6-minutes postconditioning activity. Similarly, Jo et al. (70) report that stronger athletes (back squat 1RM ≥ 1.5 × body mass) displayed significant postactivation potentiation responses at 5-minutes post conditioning activity. Careful inspection of the data presented by Jo et al. (70) reveals that the stronger athletes squatted between 1.5 and 1.9 × body mass, which is similar to the weaker group in the study by Seitz et al. (102). Therefore, athletes who squat between 1.5 and 1.75 × body mass may express potentiation responses in a time frame around 5–6 minutes, whereas stronger athletes ≥ 2.0 × body mass may demonstrate potentiation responses between 3 and 4 minutes of postconditioning activity.
From a mechanistic point of view, both nervous and muscle system responses to the potentiation-inducing activity explain the effectiveness of an SPPC. The postactivation phenomenon (PAP) may occur because of an increase in the phosphorylation of the myosin light chains, which makes actin and myosin more sensitive to calcium allowing for a more rapid rate of cross-bridge cycling (62). This response appears to be more pronounced in the type II fibers (2,59 2,59), thus suggesting that individuals, such as football players (129), who generally possess a higher percentage of type II fibers may be able to display a greater degree of PAP. Therefore, football players may receive a greater benefit from the use of SPPC because of their potential for expressing greater PAP.
An additional factor that can predicate the effectiveness of the SPPC and the PAP is the nervous system response to the PAP-inducing activity. The neural effects are primary contributors to the force production characteristics during high-velocity ballistic movements (51,109 51,109). Neural factors that can impact the effectiveness of the SPPC include increased motor unit synchronization, desensitization of alpha motor-neuron input, and a decreased reciprocal inhibition of antagonists (22,51 22,51).
Although the exact mechanism that predicates the effectiveness of an SPPC has not been completely defined, it is clear that 3 factors can impact the effectiveness of an SPPC. First, it appears that the athlete's strength levels play a primary role in determining the degree of potentiation that can be stimulated (22,34,82,97 22,34,82,97 22,34,82,97 22,34,82,97) and the time course needed between the conditioning activity and the power activity (70,102 70,102). Based on the available literature, it appears that football players who can back squat ≥ 2.0 × body mass will express the greatest potentiation effects, when using the back squat as the potentiation-inducing activity (97). Second, the athlete's level of fatigue appears to modulate performance effects of the SPPC (100), where lower levels of fatigue facilitate the PAP response. Interestingly, athletes who are stronger (back squat ≥ 2.0 × body mass) are able to express the PAP response much quicker than weaker athletes (70,102 70,102). This response may be related to the ability of stronger athletes to develop fatigue resistance or a quicker rate of recovery to heavier training loads (22,70 22,70), thus allowing postactivation potentiation responses to be displayed sooner after a conditioning activity. Finally, the athlete's overall training status appears to significantly impact the individual's ability to express a PAP response (22), with more trained individuals being able to express greater PAP responses. Based on these data, it is clear that more trained football players who possess the requisite strength levels can maximize the benefits of the use of SPPC.
There are many methods for which to use SPPCs. For example, one could perform ascending back squats, rest for 5–8 minutes, and then perform a 40-m sprint (82), repeated horizontal plyometric jumps (97), or vertical plyometric exercise such as a box jump or vertical jump. These various protocols would be beneficial to the athlete's development and based on the fact that fatigue would mitigate the ability to express the PAP effect should be considered in the context of the phase of training being undertaken. Most likely, the SPPC can begin to be used in the phase of the periodized plan that is designed to maximize power development and be used as a tool to translate strength gains into the expression of higher power outputs. Regardless of the structure of the SPPC, it is always critical to remember that this training intervention is best suited for football players who are highly trained and can back squat ≥ 2.0 × body mass when use squatting exercises as the potentiation-inducing activity.
The development of high levels of muscular strength is a critical goal when preparing the football player for competition. Based on the current body of literature, it is clear that a sequential approach to the training process where the focus of training leads from the development of muscle cross-sectional area to strength development and then the translation of those strength characteristics is necessary to optimize power production. Conceptually, the various phases of the training process allow for the physiological adaptations to occur that underlie the expression of power. During the various phases of training, several specialized methods of developing power can be targeted. For example, weightlifting exercises can be used in the strength-endurance, basic-strength, and strength-power phases. While it is probably best to only perform plyometric activities during the basic strength and strength power phases, the use of SPPC should be limited to the strength power phase of training. Ultimately, the literature is very clear that the optimization of power-generating capacity is established based on high levels of muscular strength. As such, the football player's development should consistently strive to increase overall muscular strength levels, while attempting to translate that strength to the expression of power and speed.
1. Aagaard P, Simonsen EB, Andersen JL, Magnusson P, Dyhre-Poulsen P. Neural adaptation to resistance training: Changes in evoked V-wave and H-reflex responses. J Appl Physiol (1985) 92: 2309–2318, 2002.
2. Abbate F, Van Der Velden J, Stienen GJ, De Haan A. Post-tetanic potentiation increases energy cost to a higher extent than work in rat fast skeletal muscle. J Muscle Res Cell Motil 22: 703–710, 2001.
3. Andersen LL, Aagaard P. Influence of maximal muscle strength and intrinsic muscle contractile properties on contractile rate of force development
. Eur J Appl Physiol 96: 46–52, 2006.
4. Andersen LL, Andersen JL, Zebis MK, Aagaard P. Early and late rate of force development
: Differential adaptive responses to resistance training? Scand J Med Sci Sports 20: e162–169, 2010.
5. Baker D. Applying the in-season periodization
of strength and power training to football. Strength Cond J 20: 18–27, 1998.
6. Baker D. Comparison of upper-body strength and power between professional and college-aged rugby league players. J Strength Cond Res 15: 30–35, 2001.
7. Baker D, Nance S, Moore M. The load that maximizes the average mechanical power output during explosive bench press throws in highly trained athletes. J Strength Cond Res 15: 20–24, 2001.
8. Baker D, Nance S, Moore M. The load that maximizes the average mechanical power output during jump squats in power-trained athletes. J Strength Cond Res 15: 92–97, 2001.
9. Baker DG, Newton RU. Adaptations in upper-body maximal strength and power output resulting from long-term resistance training in experienced strength-power athletes. J Strength Cond Res 20: 541–546, 2006.
10. Baker DG, Newton RU. Comparison of lower body strength, power, acceleration, speed, agility, and sprint momentum to describe and compare playing rank among professional rugby league players. J Strength Cond Res 22: 153–158, 2008.
11. Barker M, Wyatt TJ, Johnson RL, Stone MH, O'Bryant HS, Poe C, Kent M. Performance factors, physiological assessment, physical characteristic, and football playing ability. J Strength Cond Res 7: 224–233, 1993.
12. Bobbert MF, Gerritsen KG, Litjens MC, Van Soest AJ. Why is countermovement jump height greater than squat jump height? Med Sci Sports Exerc 28: 1402–1412, 1996.
13. Bompa TO, Haff GG. Periodization
: Theory and Methodology of Training. Champaign, IL: Human Kinetics Publishers, 2009.
14. Bondarchuk A. Periodization
of sports training. Legkaya Atletika 12: 8–9, 1986.
15. Bondarchuk AP. Constructing a training system. Track Tech 102: 254–269, 1988.
16. Bottinelli R, Canepari M, Pellegrino MA, Reggiani C. Force-velocity properties of human skeletal muscle fibres: Myosin heavy chain isoform and temperature dependence. J Physiol 495(Pt 2): 573–586, 1996.
17. Bottinelli R, Pellegrino MA, Canepari M, Rossi R, Reggiani C. Specific contributions of various muscle fibre types to human muscle performance: An in vitro study. J Electromyogr Kinesiol 9: 87–95, 1999.
18. Bret C, Rahmani A, Dufour AB, Messonnier L, Lacour JR. Leg strength and stiffness as ability factors in 100 m sprint running. J Sports Med Phys Fitness 42: 274–281, 2002.
19. Carlock J, Smith A, Hartman M, Morris R, Ciroslan D, Pierce KC, Newton RU, Stone MH. The relationship between vertical jump power estimates and weightlifting ability: A field test approach. J Strength Cond Res 18: 534–539, 2004.
20. Chaouachi A, Brughelli M, Chamari K, Levin GT, Ben Abdelkrim N, Laurencelle L, Castagna C. Lower limb maximal dynamic strength and agility determinants in elite basketball players. J Strength Cond Res 23: 1570–1577, 2009.
21. Chatzopoulos DE, Michailidis CJ, Giannakos AK, Alexiou KC, Patikas DA, Antonopoulos CB, Kotzamanidis CM. Postactivation potentiation
effects after heavy resistance exercise on running speed. J Strength Cond Res 21: 1278–1281, 2007.
22. Chiu LZ, Fry AC, Weiss LW, Schilling BK, Brown LE, Smith SL. Postactivation potentiation
response in athletic and recreationally trained individuals. J Strength Cond Res 17: 671–677, 2003.
23. Chmielewski TL, Myer GD, Kauffman D, Tillman SM. Plyometric exercise
in the rehabilitation of athletes: Physiological responses and clinical application. J Orthop Sports Phys Ther 36: 308–319, 2006.
24. Cleather DJ, Goodwin JE, Bull AM. Intersegmental moment analysis characterizes the partial correspondence of jumping and jerking. J Strength Cond Res 27: 89–100, 2013.
25. Cormie P, McBride JM, McCaulley GO. Power-time, force-time, and velocity-time curve analysis during the jump squat: Impact of load. J Appl Biomech 24: 112–120, 2008.
26. Cormie P, McCaulley GO, McBride JM. Power versus strength-power jump squat training: Influence on the load-power relationship. Med Sci Sports Exerc 39: 996–1003, 2007.
27. Cormie P, McGuigan MR, Newton RU. Adaptations in athletic performance following ballistic power vs strength training. Med Sci Sports Exerc 42: 1582–1598, 2010.
28. Cormie P, McGuigan MR, Newton RU. Influence of strength on magnitude and mechanisms of adaptation to power training. Med Sci Sports Exerc 42: 1566–1581, 2010.
29. Coyle EF, Costill DL, Lesmes GR. Leg extension power and muscle fiber composition. Med Sci Sports 11: 12–15, 1979.
30. Cronin JB, Hansen KT. Strength and power predictors of sports speed. J Strength Cond Res 19: 349–357, 2005.
31. Delecluse CH, Van Coppenolle H, Willems E, Diels R, Goris M, Van Leemputte M, Vuylsteke M. Analysis of 100 m sprint performance as a multi-dimensional skill. J Hum Movement Stud 28: 87–101, 1995.
32. Driss T, Vandewalle H, Quievre J, Miller C, Monod H. Effects of external loading on power output in a squat jump on a force platform: A comparison between strength and power athletes and sedentary individuals. J Sports Sci 19: 99–105, 2001.
33. Dupler TL, Amonette WE, Coleman AE, Hoffman JR, Wenzel T. Anthropometric and performance differences among high-school football players. J Strength Cond Res 24: 1975–1982, 2010.
34. Duthie GM, Young WB, Aitken DA. The acute effects of heavy loads on jump squat performance: An evaluation of the complex and contrast methods of power development. J Strength Cond Res 16: 530–538, 2002.
35. Edgerton VR, Roy RR, Gregor RJ, Rugg S. Morphological basis of skeletal muscle power output. In: Human Muscle Power. Jones NL, McCartney N, McComas AJ, eds. Champaign, IL: Human Kinetics, 1986. pp. 43–64.
36. Elliott MC, Wagner PP, Chiu L. Power athletes and distance training: Physiological and biomechanical rationale for change. Sports Med 37: 47–57, 2007.
37. Enoka RM. The pull in Olympic weightlifting. Med Sci Sports 11: 131–137, 1979.
38. Ettema GJ. Mechanical behaviour of rat skeletal muscle during fatiguing stretch-shortening cycles. Exp Physiol 82: 107–119, 1997.
39. Faulkner JA, Claflin DR, McCully KK. Power output of fast and slow fibers from human skeletal muscle. In: Human Muscle Power. Jones NL, McCartney N, McComas AJ, eds. Champaign, IL: Human Kinetics, 1986. pp. 81–94.
40. Fitts RH, McDonald KS, Schluter JM. The determinants of skeletal muscle force and power: Their adaptability with changes in activity pattern. J Biomech 24(Suppl 1): 111–122, 1991.
41. Fitts RH, Widrick JJ. Muscle mechanics: Adaptations with exercise-training. Exerc Sport Sci Rev 24: 427–473, 1996.
42. Fleck SJ, Kraemer WJ. The Ultimate Training System: Periodization
Breakthrough. New York, NY: Advanced Research Press, 1996.
43. Fleck SJ, Kraemer WJ. Designing Resistance Training Programs. Champaign, IL: Human Kinetics, 1997.
44. Fleck S, Kraemer WJ. Designing Resistance Training Programs. Champaign, IL: Human Kinetics, 2004.
45. Fry AC, Kraemer WJ. Physical performance characteristics of American collegiate football players. J Appl Sport Sci Res 5: 126–138, 1991.
46. Garhammer J. Power production by Olympic weightlifters. Med Sci Sports Exerc 12: 54–60, 1980.
47. Garhammer J. Biomechanical profiles of Olympic weightlifters. Int J Sport Biomech 1: 122–130, 1985.
48. Garhammer J. A comparison of maximal power outputs between elite male and female weightlifters in competition. Int J Sport Biomech 7: 3–11, 1991.
49. Garhammer J. A review of power output studies of Olympic and powerlifting: Methodology, performance prediction, and evaluation tests. J Strength Cond Res 7: 76–78, 1993.
50. Gourgoulis V, Aggeloussis N, Kasimatis P, Mavromatis G, Garas A. Effect of a submaximal half-squats warm-up program on vertical jumping ability. J Strength Cond Res 17: 342–344, 2003.
51. Güllich A, Schmidtbleicher D. MVC-induced short-term potentiation of explosive force. New Stud Athletics 11: 67–81, 1996.
52. Haff GG. Periodization
of training. In: Conditioning for Strength and Human Performance. Brown LE, Chandler J, eds. Philadelphia, PA: Wolters Kluwer, Lippincott, Williams & Wilkins, 2012.
53. Haff GG, Carlock JM, Hartman MJ, Kilgore JL, Kawamori N, Jackson JR, Morris RT, Sands WA, Stone MH. Force-time curve characteristics of dynamic and isometric muscle actions of elite women Olympic weightlifters. J Strength Cond Res 19: 741–748, 2005.
54. Haff GG, Haff EE. Training integration and periodization
. In: Strength and Conditioning Program Design. Hoffman J, ed. Champaign, IL: Human Kinetics, 2012. pp. 209–254.
55. Haff GG, Nimphius S. Training principles for power. Strength Conditioning J 34: 2–12, 2012.
56. Haff GG, Stone MH, O'Bryant HS, Harman E, Dinan CN, Johnson R, Han KH. Force-time dependent characteristics of dynamic and isometric muscle actions. J Strength Cond Res 11: 269–272, 1997.
57. Haff GG, Whitley A, Potteiger JA. A brief review: Explosive exercises and sports performance. Strength Cond J 23: 13–20, 2011.
58. Häkkinen K, Myllyla E. Acute effects of muscle fatigue and recovery on force production and relaxation in endurance, power and strength athletes. J Sports Med Phys Fitness 30: 5–12, 1990.
59. Hamada T, Sale DG, MacDougall JD, Tarnopolsky MA. Postactivation potentiation
, fiber type, and twitch contraction time in human knee extensor muscles. J Appl Physiol (1985) 88: 2131–2137, 2000.
60. Harridge SD. Plasticity of human skeletal muscle: Gene expression to in vivo function. Exp Physiol 92: 783–797, 2007.
61. Harris GR, Stone MH, O'Bryant HS, Proulx CM, Johnson RL. Short-term performance effects of high power, high force, or combined weight-training methods. J Strength Cond Res 14: 14–20, 2000.
62. Hodgson M, Docherty D, Robbins D. Post-activation potentiation: Underlying physiology and implications for motor performance. Sports Med 35: 585–595, 2005.
63. Hoffman JR. The applied physiology of American football. Int J Sports Physiol Perform 3: 387–392, 2008.
64. Hoffman JR, Cooper J, Wendell M, Kang J. Comparison of Olympic vs. traditional power lifting training programs in football players. J Strength Cond Res 18: 129–135, 2004.
65. Hoffman JR, Wendell M, Cooper J, Kang J. Comparison between linear and nonlinear in-season training programs in freshman football players. J Strength Cond Res 17: 561–565, 2003.
66. Hori N, Newton RU, Andrews WA, Kawamori N, McGuigan MR, Nosaka K. Does performance of hang power clean differentiate performance of jumping, sprinting, and changing of direction? J Strength Cond Res 22: 412–418, 2008.
67. Issurin V. Block periodization
versus traditional training theory: A review. J Sports Med Phys Fitness 48: 65–75, 2008.
68. Issurin VB. New horizons for the methodology and physiology of training periodization
. Sports Med 40: 189–206, 2010.
69. Jacobson BH, Conchola EG, Glass RG, Thompson BJ. Longitudinal morphological and performance profiles for American, NCAA Division I football players. J Strength Cond Res 27: 2347–2354, 2013.
70. Jo E, Judelson DA, Brown LE, Coburn JW, Dabbs NC. Influence of recovery duration after a potentiating stimulus on muscular power in recreationally trained individuals. J Strength Cond Res 24: 343–347, 2010.
71. Jones L. Exercise Techniques: The pulling movement. Strength Cond J 13: 14–18, 1991.
72. Kawamori N, Crum AJ, Blumert P, Kulik J, Childers J, Wood J, Stone MH, Haff GG. Influence of different relative intensities on power output during the hang power clean: Identification of the optimal load. J Strength Cond Res 19: 698–708, 2005.
73. Kawamori N, Haff GG. The optimal training load for the development of muscular power. J Strength Cond Res 18: 675–684, 2004.
74. Kilduff LP, Bevan HR, Kingsley MI, Owen NJ, Bennett MA, Bunce PJ, Hore AM, Maw JR, Cunningham DJ. Postactivation potentiation
in professional rugby players: Optimal recovery. J Strength Cond Res 21: 1134–1138, 2007.
75. Kraemer WJ, Hatfield DL, Fleck SJ. Types of muscle training. In: Strength Training. Brown LE, ed. Champaign, IL: Human Kinetics, 2007. pp. 45–72.
76. Kraemer WJ, Ratamess N, Fry AC, Triplett-McBride T, Koziris LP, Bauer JA, Lynch JM, Fleck SJ. Influence of resistance training volume and periodization
on physiological and performance adaptations in collegiate women tennis players. Am J Sports Med 28: 626–633, 2000.
77. Kraemer WJ, Vingren JL, Hatfield DL, Spiering BA, Fragala MS. Resistance training programs. In: ACSM's Resources for the Personal Trainer. Thompson WR, Baldwin KE, Pire NI, Niederpruem M, eds. Baltimore, MD: Lippincott, Williams, & Wilkins, 2007. pp. 372–403.
78. Kraska JM, Ramsey MW, Haff GG, Fethke N, Sands WA, Stone ME, Stone MH. Relationship between strength characteristics and unweighted and weighted vertical jump height. Int J Sports Physiol Perform 4: 461–473, 2009.
79. Kurz T. Science of Sports Training. Island Pond, VT: Stadion Publishing Company, Inc, 2001.
80. Markovic G. Does plyometric training improve vertical jump height? A meta-analytical review. Br J Sports Med 41: 349–355, 2007; discussion 355.
81. Markovic G, Mikulic P. Neuro-musculoskeletal and performance adaptations to lower-extremity plyometric training. Sports Med 40: 859–895, 2010.
82. McBride JM, Nimphius S, Erickson TM. The acute effects of heavy-load squats and loaded countermovement jumps on sprint performance. J Strength Cond Res 19: 893–897, 2005.
83. McBride JM, Triplett-McBride T, Davie A, Newton RU. A comparison of strength and power characteristics between power lifters, Olympic lifters, and sprinters. J Strength Cond Res 13: 58–66, 1999.
84. McGuigan MR, Doyle TL, Newton M, Edwards DJ, Nimphius S, Newton RU. Eccentric utilization ratio: Effect of sport and phase of training. J Strength Cond Res 20: 992–995, 2006.
85. McMaster DT, Gill N, Cronin J, McGuigan M. The development, retention and decay rates of strength and power in elite rugby union, rugby league and American football: A systematic review. Sports Med 43: 367–384, 2013.
86. Minetti AE. On the mechanical power of joint extensions as affected by the change in muscle force (or cross-sectional area), ceteris paribus. Eur J Appl Physiol 86: 363–369, 2002.
87. Moritani T. Motor unit and motoneurone excitability during explosive movement. In: Strength and Power in Sport. Komi PV, ed. Malden, MA: Blackwell Scientific, 2003. pp. 115–130.
88. Newton RU, Rogers RA, Volek JS, Hakkinen K, Kraemer WJ. Four weeks of optimal load ballistic resistance training at the end of season attenuates declining jump performance of women volleyball players. J Strength Cond Res 20: 955–961, 2006.
89. Plisk SS, Gambetta V. Tactical metabolic training: Part 1. Strength and Cond 19: 44–53, 1997.
90. Pryor JL, Huggins RA, Casa DJ, Palmieri GA, Kraemer WJ, Maresh CM. A profile of a National Football League team. J Strength Cond Res 28: 7–13, 2014.
91. Radcliffe JC, Farentinos RC. High Powered Plyometrics. Champaign, IL: Human Kinetics, 1999.
92. Radcliffe JC, Radcliffe JL. Effects of different warm-up protocols on peak power output during a single response jump task. Med Sci Sports Exerc 28: S189, 1996. Abstract.
93. Rahmani A, Viale F, Dalleau G, Lacour JR. Force/velocity and power/velocity relationships in squat exercise. Eur J Appl Physiol 84: 227–232, 2001.
94. Rassier DE, Herzog W. Force enhancement and relaxation rates after stretch of activated muscle fibres. Proc Biol Sci 272: 475–480, 2005.
95. Rassier DE, Herzog W. Relationship between force and stiffness in muscle fibers after stretch. J Appl Physiol (1985) 99: 1769–1775, 2005.
96. Reeves ND, Maganaris CN, Longo S, Narici MV. Differential adaptations to eccentric versus conventional resistance training in older humans. Exp Physiol 94: 825–833, 2009.
97. Ruben RM, Molinari MA, Bibbee CA, Childress MA, Harman MS, Reed KP, Haff GG. The acute effects of an ascending squat protocol on performance during horizontal plyometric jumps. J Strength Cond Res 24: 358–369, 2010.
98. Saez-Saez de Villarreal E, Requena B, Newton RU. Does plyometric training improve strength performance? A meta-analysis. J Sci Med Sport 13: 513–522, 2010.
99. Sale DG. Neural adaptation to resistance training. Med Sci Sports Exerc 20: S135–S145, 1988.
100. Sale DG. Postactivation potentiation
: Role in human performance. Exerc Sport Sci Rev 30: 138–143, 2002.
101. Schmidtbleicher D. Training for power events. In: Strength and Power in Sport. Komi PV, ed. Oxford, United Kingdom: Blackwell, 1992. pp. 381–385.
102. Seitz L, Saez de Villarreal E, Haff GG. The temporal profile of postactivation potentiation
is related to strength level. J Strength Cond Res. 28: 706–715, 2014.
103. Seitz LB, Trajano GS, Haff GG. The back squat and the power clean elicit different degrees of potentiation. Int J Sports Physiol Perform. 9: 643–649, 2014.
104. Semmler JG. Motor unit synchronization and neuromuscular performance. Exerc Sport Sci Rev 30: 8–14, 2002.
105. Semmler JG, Kornatz KW, Dinenno DV, Zhou S, Enoka RM. Motor unit synchronisation is enhanced during slow lengthening contractions of a hand muscle. J Physiol 545: 681–695, 2002.
106. Siff MC. Supertraining. Denver, CO: Supertrainig Institute, 2003.
107. Stone MH, O'Bryant H, Garhammer J. A hypothetical model for strength training. J Sports Med 21: 342–351, 1981.
108. Stone MH, O'Bryant HS, McCoy L, Coglianese R, Lehmkuhl M, Schilling B. Power and maximum strength relationships during performance of dynamic and static weighted jumps. J Strength Cond Res 17: 140–147, 2003.
109. Stone MH, Sands WA, Pierce KC, Ramsey MW, Haff GG. Power and power potentiation among strength power athletes: Preliminary study. Int J Sports Physiol Perform 3: 55–67, 2008.
110. Stone MH, Stone ME, Sands WA. Principles and Practice of Resistance Training. Champaign, IL: Human Kinetics Publishers, 2007.
111. Thomas GA, Kraemer WJ, Spiering BA, Volek JS, Anderson JM, Maresh CM. Maximal power at different percentages of one repetition maximum: Influence of resistance and gender. J Strength Cond Res 21: 336–342, 2007.
112. Thomas M, Fiatarone MA, Fielding RA. Leg power in young women: Relationship to body composition, strength, and function. Med Sci Sports Exerc 28: 1321–1326, 1996.
113. Thompson BJ, Smith DB, Jacobson BH, Fiddler RE, Warren AJ, Long BC, O'Brien MS, Everett KL, Glass RG, Ryan ED. The influence of ratio and allometric scaling procedures for normalizing upper body power output in division I collegiate football players. J Strength Cond Res 24: 2269–2273, 2010.
114. Toji H, Kaneko M. Effect of multiple-load training on the force-velocity relationship. J Strength Cond Res 18: 792–795, 2004.
115. Trappe S, Harber M, Creer A, Gallagher P, Slivka D, Minchev K, Whitsett D. Single muscle fiber adaptations with marathon training. J Appl Physiol (1985) 101: 721–727, 2006.
116. Trappe S, Williamson D, Godard M, Porter D, Rowden G, Costill D. Effect of resistance training on single muscle fiber contractile function in older men. J Appl Physiol (1985) 89: 143–152, 2000.
117. Tricoli V, Lamas L, Carnevale R, Ugrinowitsch C. Short-term effects on lower-body functional power development: Weightlifting vs. vertical jump training programs. J Strength Cond Res 19: 433–437, 2005.
118. Ugrinowitsch C, Tricoli V, Rodacki AL, Batista M, Ricard MD. Influence of training background on jumping height. J Strength Cond Res 21: 848–852, 2007.
119. Van Cutsem M, Duchateau J, Hainaut K. Changes in single motor unit behaviour contribute to the increase in contraction speed after dynamic training in humans. J Physiol 513(Pt 1): 295–305, 1998.
120. Verkhoshansky YU. How to set up a training program. Sov Sports Rev 16: 123–136, 1981.
121. Verkoshansky Y. Main features of a modern scientific sports training theory. New Stud Athletics 13: 9–20, 1998.
122. Verkoshansky Y. Organization of the training process. New Stud Athletics 13: 21–31, 1998.
123. Wathen D. Literature review: Explosive/plyometric exercises. Natl Strength Cond Assoc J 15: 17–19, 1993.
124. Williamson DL, Gallagher PM, Carroll CC, Raue U, Trappe SW. Reduction in hybrid single muscle fiber proportions with resistance training in humans. J Appl Physiol (1985) 91: 1955–1961, 2001.
125. Wilson GJ, Elliott BC, Wood GA. The effect on performance of imposing a delay during a stretch-shorten cycle movement. Med Sci Sports Exerc 23: 364–370, 1991.
126. Yetter M, Moir GL. The acute effects of heavy back and front squats on speed during forty-meter sprint trials. J Strength Cond Res 22: 159–165, 2008.
127. Young WB, James R, Montgomery I. Is muscle power related to running speed with changes of direction? J Sports Med Phys Fitness 42: 282–288, 2002.
128. Zamparo P, Minetti AE, di Prampero PE. Interplay among the changes of muscle strength, cross-sectional area and maximal explosive power: Theory and facts. Eur J Appl Physiol 88: 193–202, 2002.
129. Zapiec C, Taylor AW. Muscle fibre composition and energy utilization in CFL football players. Can J Appl Sport Sci 4: 140–142, 1979.
130. Zatsiorsky VM. Science and Practice of Strength Training. Champaign, IL: Human Kinetics, 1995.
Keywords:© 2015 by the National Strength & Conditioning Association
postactivation potentiation; rate of force development; periodization; explosive strength; plyometric exercise