Secondary Logo

Journal Logo

Institutional members access full text with Ovid®

Computed Tomography of the Head and Neck Region for Tumor Staging—Comparison of Dual-Source, Dual-Energy and Low-Kilovolt, Single-Energy Acquisitions

May, Matthias Stefan MD*†; Bruegel, Joscha MD*; Brand, Michael MD*; Wiesmueller, Marco MD*; Krauss, Bernhard PhD; Allmendinger, Thomas PhD; Uder, Michael MD*†; Wuest, Wolfgang MD*†

doi: 10.1097/RLI.0000000000000377
Original Articles

Purpose The aim of this study was to intra-individually compare the image quality obtained by dual-source, dual-energy (DSDE) computed tomography (CT) examinations and different virtual monoenergetic reconstructions to a low single-energy (SE) scan.

Materials and Methods Third-generation DSDE-CT was performed in 49 patients with histologically proven malignant disease of the head and neck region. Weighted average images (WAIs) and virtual monoenergetic images (VMIs) for low (40 and 60 keV) and high (120 and 190 keV) energies were reconstructed. A second scan aligned to the jaw, covering the oral cavity, was performed for every patient to reduce artifacts caused by dental hardware using a SE-CT protocol with 70-kV tube voltages and matching radiation dose settings. Objective image quality was evaluated by calculating contrast-to-noise ratios. Subjective image quality was evaluated by experienced radiologists.

Results Highest contrast-to-noise ratios for vessel and tumor attenuation were obtained in 40-keV VMI (all P < 0.05). Comparable objective results were found in 60-keV VMI, WAI, and the 70-kV SE examinations. Overall subjective image quality was also highest for 40-keV, but differences to 60-keV VMI, WAI, and 70-kV SE were nonsignificant (all P > 0.05). High kiloelectron volt VMIs reduce metal artifacts with only limited diagnostic impact because of insufficiency in case of severe dental hardware. CTDIvol did not differ significantly between both examination protocols (DSDE: 18.6 mGy; 70-kV SE: 19.4 mGy; P = 0.10).

Conclusions High overall image quality for tumor delineation in head and neck imaging were obtained with 40-keV VMI. However, 70-kV SE examinations are an alternative and modified projections aligned to the jaw are recommended in case of severe artifacts caused by dental hardware.

From the *Department of Radiology, University of Erlangen; †Imaging Science Institute, Erlangen; and ‡Siemens Healthcare GmbH, Forchheim, Germany.

Received for publication January 26, 2017; and accepted for publication, after revision, March 15, 2017.

Conflicts of interest and sources of funding: The present work was performed in partial fulfilment of the requirements for obtaining the degree “Dr med” (J. B.). M.S.M., M.U., and W.W. are part of the speakers' bureau of Siemens GmbH. M.U. is part of the speakers bureau of Bracco Imaging GmbH.

Correspondence to: Matthias Stefan May, MD, Radiologisches Institut, Maximiliansplatz 3, 91054 Erlangen, Germany. E-mail:

Copyright © 2017 Wolters Kluwer Health, Inc. All rights reserved.